Table of Contents
Advertisement
Figure 178 Menu 15.3: Trigger Port Setup
Rule
----------------------------------------------------------------------
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
The following table describes the labels in this menu.
Table 136 Menu 15.3: Trigger Port Setup
FIELD
Name
Incoming
Start Port
End Port
Trigger
Start Port
End Port
Chapter 29 NAT Setup
Menu 15.3 - Trigger Port Setup
Incoming
Name
Start Port
0
0
0
0
0
0
0
0
0
0
0
0
DESCRIPTION
Enter a name to identify this rule. You can use 1 - 15 printable ASCII
characters, or you can leave this field blank. It does not have to be a unique
name.
Enter the incoming port number or range of port numbers you want to forward
to the IP address the ZyXEL Device records.
To forward one port number, enter the port number in the Start Port and End
Port fields.
To forward a range of ports,
•
enter the port number at the beginning of the range in the Start Port field
•
enter the port number at the end of the range in the End Port field.
If you want to delete this rule, enter zero in the Start Port and End Port fields.
Enter the outgoing port number or range of port numbers that makes the
ZyXEL Device record the source IP address and assign it to the selected
incoming port number(s).
To select one port number, enter the port number in the Start Port and End
Port fields.
To select a range of ports,
•
enter the port number at the beginning of the range in the Start Port field
•
enter the port number at the end of the range in the End Port field.
If you want to delete this rule, enter zero in the Start Port and End Port fields.
P-870HW-I1 User's Guide
Trigger
End Port
Start Port
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
End Port
0
0
0
0
0
0
0
0
0
0
0
0
285
Advertisement
Table of Contents
Troubleshooting
