Dynamic Dns Screen - ZyXEL Communications P-870HW-I Series User Manual

Table 104 Maintenance > System > General (continued)
LABEL
Domain Name
Administrator
Inactivity Timer
Password Setup
Old Password
New Password
Retype to
Confirm
Apply
Reset

18.3 Dynamic DNS Screen

Use this screen to set up and maintain dynamic DNS on your ZyXEL Device. To open this
screen, click Maintenance > System > Dynamic DNS.
Chapter 18 System
DESCRIPTION
Enter the domain name (if you know it) here. If you leave this field blank, the ISP
may assign a domain name via DHCP. The domain name entered by you is given
priority over the ISP assigned domain name.
Type how many minutes a management session (either via the web configurator or
CLI (Command Line Interpreter)) can be left idle before the session times out. After it
times out you have to log in with your password again. Very long idle timeouts may
have security risks. A value of "0" means a management session never times out, no
matter how long it has been left idle (not recommended).
Type the current password you use to access the system.
Type the new system password (up to 30 characters). As you type a password, the
screen displays a (*) for each character you type.
Type the new password again for confirmation.
Click this to save your changes back to the ZyXEL Device.
Click this to begin configuring this screen afresh.
P-870HW-I1 User's Guide
231