Remote Node Network Layer Options - ZyXEL Communications P-870HW-I Series User Manual

P-870HW-I1 User's Guide
Table 123 Menu 11.1: Remote Node Profile (continued)
FIELD
My Login
My Password
Retype to Confirm
Authen
Route
Edit IP
Telco Option
Allocated Budget(min) Enter the maximum amount of time (in minutes) each call can last. Enter 0 if
Period(hr)
Schedules
Nailed-Up Connection Select this if you want the ZyXEL Device to automatically connect to your ISP
Session Options
Edit Filter Sets
Idle Timeout(sec)
Edit Traffic Redirect

26.2 Remote Node Network Layer Options

Use this menu to set up the WAN IP address and advanced features for the WAN port. See
Chapter 7 on page 119
menu, select Yes in Edit IP in menu 11.1.
270
DESCRIPTION
Enter the user name provided by your ISP.
Enter the password provided by your ISP.
Enter the password again.
This field appears if you select PPPoE in the Encapsulation field. Select what
type of authentication your ISP uses. Select CHAP/PAP if you want the ZyXEL
Device to support both choices.
This field displays the type of routing the ZyXEL Device uses.
If you want to set up the WAN IP address and advanced features for the WAN
port, press [SPACE BAR] to select Yes and press [ENTER]. Menu 11.1.2
appears.
These fields appear if you select PPPoE in the Encapsulation field.
there is no limit. With Period, you can set a limit on the total outgoing call time
of the ZyXEL Device within a certain period of time. When the total outgoing
call time exceeds the limit, the current call will be dropped and any future
outgoing calls will be blocked.
Enter how often (in hours) the Allocated Budget is reset. For example, if you
can call for thirty minutes every hour, set the Allocated Budget to 30, and set
this field to 1.
Enter the schedule sets that apply to this connection.
when it is turned on and to remain connected all the time. This is not
recommended if you pay for your Internet connected based on the amount of
time you are connected.
If you want to specify input and output filter sets for the WAN port, press
[SPACE BAR] to select Yes and press [ENTER]. Menu 11.1.4 appears.
Enter the number of seconds the ZyXEL Device should wait while there is no
Internet traffic before it automatically disconnects from the ISP. Enter a time
interval between 10 and 9999 seconds.
If you want to set up a backup router, if you have one, in case the ZyXEL
Device cannot access the Internet, press [SPACE BAR] to select Yes and
press [ENTER]. Menu 11.1.5 appears.
and Chapter 10 on page 137 for background information. To open this
Chapter 26 Remote Node Setup