Figure 14 Connection Wizard: Wireless Lan; Table 6 Connection Wizard: Wireless Lan - ZyXEL Communications P-870HW-I Series User Manual

802.11g wireless vdsl2 4-port gateway
Hide thumbs Also See for P-870HW-I Series:
Table of Contents

Advertisement

P-870HW-I1 User's Guide

Figure 14 Connection Wizard: Wireless LAN

The following table describes the labels in this screen.

Table 6 Connection Wizard: Wireless LAN

LABEL
Name(SSID)
Channel
Selection
Security
Back
Next
Exit
58
DESCRIPTION
The Service Set IDentity (SSID) is the name of the wireless network. Every wireless
client in the same wireless network must use the same SSID. Enter this value as
indicated.
Like radio stations or television channels, each wireless network uses a specific
channel, or frequency, to send and receive information. If there are other wireless
networks in the area, select a channel at least five channels away from the other
wireless networks.
Select the strongest level that all the computers in your wireless network support.
From weakest to strongest, the security levels are
None
Basic (WEP)
Auto or Extend (WPA-PSK). Select Auto if you want the ZyXEL Device to
generate a pre-shared key for your wireless network. Select Extend if you want
to set up a specific pre-shared key for your wireless network (for example, if your
wireless network already uses a specific pre-shared key).
Extend (WPA2-PSK)
If you want to use ZyXEL's One-Touch Intelligent Security Technology (OTIST), you
can select any level except Extend(WPA2-PSK), but it is simpler to select Auto.
Click this to return to the previous screen.
Click this to save your changes on this screen and to proceed to the next screen.
Click this to close the wizard without saving the changes on this screen.
Chapter 3 Connection Wizard

Advertisement

Table of Contents
loading

Table of Contents