Figure 94 Security > Certificates > My Certificates; Table 73 Security > Certificates > My Certificates - ZyXEL Communications P-870HW-I Series User Manual

Figure 94 Security > Certificates > My Certificates
The following table describes the labels in this screen.
Table 73 Security > Certificates > My Certificates
LABEL
PKI Storage
Space in Use
Replace
#
Name
Type
Subject
Issuer
Chapter 13 Certificates
DESCRIPTION
This bar displays the percentage of the ZyXEL Device's PKI storage space that is
currently in use. The bar turns from green to red when the maximum is being
approached. When the bar is red, you should consider deleting expired or
unnecessary certificates before adding more certificates.
This button displays when the ZyXEL Device has the factory default certificate.
The factory default certificate is common to all ZyXEL Device that use certificates.
ZyXEL recommends that you use this button to replace the factory default
certificate with one that uses your ZyXEL Device's MAC address.
This field displays the certificate index number. The certificates are listed in
alphabetical order.
This field displays the name used to identify this certificate. It is recommended that
you give each certificate a unique name.
This field displays what kind of certificate this is.
REQ represents a certification request and is not yet a valid certificate. Send a
certification request to a certification authority, which then issues a certificate. Use
the My Certificate Import screen to import the certificate and replace the request.
SELF represents a self-signed certificate.
*SELF represents the default self-signed certificate, which the ZyXEL Device uses
to sign imported trusted remote host certificates.
CERT represents a certificate issued by a certification authority.
This field displays identifying information about the certificate's owner, such as CN
(Common Name), OU (Organizational Unit or department), O (Organization or
company) and C (Country). It is recommended that each certificate have unique
subject information.
This field displays identifying information about the certificate's issuing certification
authority, such as a common name, organizational unit or department,
organization or company and country. With self-signed certificates, this is the same
information as in the Subject field.
P-870HW-I1 User's Guide
171