Table of Contents
Advertisement
22.3 Configure Dynamic DNS
Use this menu to configure your dynamic DNS domain name settings. See
229
for background information. To open this menu, select Yes in Edit Host in menu 1.1.
Figure 157 Menu 1.1.1: DDNS Edit Host
Hostname=
DDNS Type= DynamicDNS
Enable Wildcard Option= No
Enable Off Line Option= N/A
IP Address Update Policy:
Let DDNS Server Auto Detect= No
Use User-Defined= No
Use WAN IP Address= N/A
The following table describes the labels in this menu.
Table 115 Menu 1.1.1: DDNS Edit Host
FIELD
Hostname
DDNS Type
Enable Wildcard
Option
Enable Off Line
Option
IP Address Update
Policy
Let DDNS Server
Auto Detect
Use User-Defined
Use WAN IP Address Select Use User-Defined if you have a static IP address, and type the IP
Chapter 22 General Setup
Menu 1.1.1 - DDNS Edit Host
DESCRIPTION
Type the domain name assigned to your ZyXEL Device by your Dynamic DNS
provider.
Select the type of service for which you are registered from your Dynamic DNS
service provider.
Select this to enable DynDNS Wildcard.
This option is available when CustomDNS is selected in the DDNS Type field.
Check with your Dynamic DNS service provider to have traffic redirected to a
URL (that you can specify) while you are off line.
If you do not select either option below, the ZyXEL Device uses the WAN IP
address for the domain name.
Select this only when there are one or more NAT routers between the ZyXEL
Device and the DDNS server. With this feature, the DDNS server automatically
detects and uses the IP address of the appropriate NAT router that has a public
IP address.
Note: The DDNS server may not be able to detect the proper IP
address if there is an HTTP proxy server between the
ZyXEL Device and the DDNS server.
Select this if you have a static IP address, and type the IP address for the host
name(s) in the Use WAN IP Address field.
address for the host name(s) in this field.
P-870HW-I1 User's Guide
Chapter 18 on page
255
Advertisement
Table of Contents
Troubleshooting
