Edit Directory Server Screen; Figure 108 Security > Certificates > Directory Servers > Edit; Table 84 Security > Certificates > Directory Servers > Edit - ZyXEL Communications P-870HW-I Series User Manual

13.14 Edit Directory Server Screen

Use this screen to create or edit a directory server the ZyXEL Device should use if the
certificate does not list a server or if the listed server is not available. To open this screen, click
Add or an Edit icon in Security > Certificates > Directory Servers.
Figure 108 Security > Certificates > Directory Servers > Edit
The following table describes the labels in this screen.
Table 84 Security > Certificates > Directory Servers > Edit
LABEL
Directory Service
Setting
Name
Access Protocol
Server Address
Server Port
Login Setting
Login
Password
Chapter 13 Certificates
DESCRIPTION
Type up to 31 ASCII characters (spaces are not permitted) to identify this directory
server.
a
Use the drop-down list box to select the access protocol used by the directory
server.
LDAP (Lightweight Directory Access Protocol) is a protocol over TCP that
specifies how clients access directories of certificates and lists of revoked
certificates.
Type the IP address (in dotted decimal notation) or the domain name of the
directory server.
This field displays the default server port number of the protocol that you select in
the Access Protocol field.
You may change the server port number if needed, however you must use the
same server port number that the directory server uses.
389 is the default server port number for LDAP.
The ZyXEL Device may need to authenticate itself in order to assess the directory
server. Type the login name (up to 31 ASCII characters) from the entity
maintaining the directory server (usually a certification authority).
Type the password (up to 31 ASCII characters) from the entity maintaining the
directory server (usually a certification authority).
P-870HW-I1 User's Guide
191