Linux; Figure 255 Red Hat 9.0: Kde: Network Configuration: Devices - ZyXEL Communications P-870HW-I Series User Manual

802.11g wireless vdsl2 4-port gateway

Hide thumbs Also See for P-870HW-I Series:

Table of Contents

P-870HW-I1 User's Guide

6 Restart your computer (if prompted).

Verifying Settings

Check your TCP/IP properties in the Network window.

Linux

This section shows you how to configure your computer's TCP/IP settings in Red Hat Linux

9.0. Procedure, screens and file location may vary depending on your Linux distribution and

release version.

Note: Make sure you are logged in as the root administrator.

Using the K Desktop Environment (KDE)

Follow the steps below to configure your computer IP address using the KDE.

1 Click the Red Hat button (located on the bottom left corner), select System Setting and

click Network.

2 Double-click on the profile of the network card you wish to configure. The Ethernet

Device General screen displays as shown.

Appendix B Setting up Your Computer's IP Address