P-870HW-I1 User's Guide
IPPR follows the existing packet filtering facility of RAS in style and in implementation.
37.4 IP Routing Policy Summary
Use this menu to look at policy routes. To open this menu, enter 25 in the main menu.
Figure 225 Menu 25: IP Routing Policy Summary
#
A
--- - ---------------------------------------------------------------------
001 N SA=1.1.1.1-1.1.1.1 DA=2.2.2.2-2.2.2.5
SP=20-25 DP=20-25 P=6 T=NM PR=0
002 N _____________________________________________________________________
_____________________________________________________________________
003 N _____________________________________________________________________
_____________________________________________________________________
004 N _____________________________________________________________________
_____________________________________________________________________
005 N _____________________________________________________________________
_____________________________________________________________________
006 N _____________________________________________________________________
_____________________________________________________________________
The following table describes the labels in this menu.
Table 158 Menu 25: IP Routing Policy Summary
FIELD
#
Criteria/Action
Select Command
Select Rule
Table 159 Menu 25: IP Routing Policy Summary, Abbreviations
ABBREVIATION
SA
SP
DA
DP
P
T
340
Menu 25 - IP Routing Policy Summary
Criteria/Action
Select Command= None
DESCRIPTION
This field displays the rule number.
See
Table 159 on page
In the Select Command field, press the [SPACEBAR] to select what change
you would like to make. For some actions, enter the rule number in the Select
Rule field to specify on which rule you would like to apply the action.
MEANING
Source IP Address
Source Port
Destination IP Address
Destination Port
IP layer 4 protocol number (TCP=6, UDP=17...)
Type of service of incoming packet
|GW=192.168.1.1 T=MT PR=0
Select Rule= N/A
340.
Chapter 37 IP Routing Policy Setup