Figure 56 Example: Wireless Client Otist Screen; Figure 57 Otist: Settings; Figure 58 Otist: In Progress On The Zyxel Device - ZyXEL Communications P-870HW-I Series User Manual

P-870HW-I1 User's Guide

Figure 56 Example: Wireless Client OTIST Screen

To start OTIST in the wireless client, click Start in this screen.
Note: You must click Start in the ZyXEL Device and in the wireless client(s) within
three minutes of each other. You can start OTIST in the wireless clients and the
ZyXEL Device in any order.
After you click Start in the ZyXEL Device, the following screen appears (in the ZyXEL
Device).

Figure 57 OTIST: Settings

You can use the key in this screen to set up WPA-PSK encryption manually for non-OTIST
wireless clients in the wireless network.
Review the settings, and click OK. The ZyXEL Device begins transferring OTIST settings.
The following screens appear in the ZyXEL Device and in the wireless clients.

Figure 58 OTIST: In Progress on the ZyXEL Device

110 Chapter 6 Wireless LAN