Figure 229 Ip Routing Policy Example 1 - ZyXEL Communications P-870HW-I Series User Manual

P-870HW-I1 User's Guide
1 Create a rule in Menu 25.1 - IP Routing Policy Setup as shown next.

Figure 229 IP Routing Policy Example 1

2 Select Yes in the LAN field in menu 25.1.1 to apply the policy to packets received on the
LAN port.
3 Check Menu 25 - IP Routing Policy Summary to see if the rule is added correctly.
4 Create another rule in menu 25.1 for this rule to route packets from any host (IP=0.0.0.0
means any host) with protocol TCP and port FTP access through another gateway
(192.168.1.100).
344
Menu 25.1 - IP Routing Policy Setup
Rule Index= 1
Criteria:
IP Protocol = 6
Type of Service= Don't Care
Precedence = Don't Care
Source:
addr start= 192.168.1.33
port start= 0
Destination:
addr start= 0.0.0.0
port start= 80
Action= Matched
Gateway Type= IP Address
Gateway addr = 192.168.1.1
Type of Service= Max Thruput
Precedence = 0
Edit policy to packets received from= No
end= 192.168.1.64
end= N/A
Press ENTER to Confirm or ESC to Cancel:
Chapter 37 IP Routing Policy Setup
Active= Yes
Packet length= 10
Len Comp= Equal
end= N/A
end= 80
Redirect packet= N/A
Log= No