Table of Contents
Advertisement
Table 59 Network > NAT > Port Forwarding (continued)
LABEL
Server IP Address This field displays the IP address of the server to which packet for the selected
Modify
Apply
Reset
10.3.1 Port Forwarding Edit Screen
Use this screen to activate, deactivate, and edit each port-forwarding rule in the ZyXEL
Device. To open this screen, click an Edit icon in Network > NAT > Port Forwarding.
Figure 78 Network > NAT > Port Forwarding > Edit
The following table describes the fields in this screen.
Table 60 Network > NAT > Port Forwarding > Edit
LABEL
Active
Service Name
Start Port
End Port
Server IP
Address
Chapter 10 NAT
port(s) are forwarded.
This column provides icons to edit and delete rules.
To edit a rule, click the Edit icon next to the rule. The Port Forwarding Edit screen
appears.
To delete a rule, click the Remove icon next to the rule. All the information in the
rule returns to the default settings.
Click this to save your changes back to the ZyXEL Device.
Click this to begin configuring this screen afresh.
Select this to enable this rule. Clear this to disable this rule.
Enter a name to identify this rule. You can use 1 - 31 printable ASCII characters, or
you can leave this field blank. It does not have to be a unique name.
Enter the port number or range of port numbers you want to forward to the specified
server.
To forward one port number, enter the port number in the Start Port and End Port
fields.
To forward a range of ports,
•
enter the port number at the beginning of the range in the Start Port field
•
enter the port number at the end of the range in the End Port field.
Enter the IP address of the server to which to forward packets for the selected port
number(s). This server is usually on the LAN.
P-870HW-I1 User's Guide
DESCRIPTION
DESCRIPTION
141
Advertisement
Table of Contents
Troubleshooting
