Traffic Redirect Setup; Figure 167 Menu 11.1.4: Remote Node Filter; Table 125 Menu 11.1.4: Remote Node Filter - ZyXEL Communications P-870HW-I Series User Manual

Figure 167 Menu 11.1.4: Remote Node Filter

The following table describes the labels in this menu.

Table 125 Menu 11.1.4: Remote Node Filter

FIELD
Input Filter Sets
protocol filters
device filters
Output Filter Sets
protocol filters
device filters
Call Filter Sets
protocol filters
device filters

26.4 Traffic Redirect Setup

Use this menu to set up a backup router, if you have one, in case the ZyXEL Device cannot
access the Internet. See
menu, select Yes in Edit Traffic Redirect in menu 11.1.
Chapter 26 Remote Node Setup
Menu 11.1.4 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Call Filter Sets:
protocol filters=
device filters=
DESCRIPTION
Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
These fields appear if you selected PPPoE in Encapsulation in menu 11.
Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
Chapter 7 on page 119
P-870HW-I1 User's Guide
for background information. To open this
273