P-870HW-I1 User's Guide
Table 60 Network > NAT > Port Forwarding > Edit (continued)
LABEL
Apply
Reset
10.4 Trigger Port Screen
Use this screen to maintain port-triggering rules in the ZyXEL Device. To open this screen,
click Network > NAT > Trigger Port.
Figure 79 Network > NAT > Trigger Port
The following table describes the fields in this screen.
Table 61 Network > NAT > Trigger Port
LABEL
Name
Incoming
142
Click this to save your changes back to the ZyXEL Device.
Click this to return to the previous screen without saving any changes.
DESCRIPTION
Enter a name to identify this rule. You can use 1 - 15 printable ASCII characters, or
you can leave this field blank. It does not have to be a unique name.
DESCRIPTION
Chapter 10 NAT