Wireless Security: Basic Security Screen 2; Figure 16 Connection Wizard: Wireless Security: Basic Security Screen 1; Table 8 Connection Wizard: Wireless Security: Basic Security Screen 1 - ZyXEL Communications P-870HW-I Series User Manual

P-870HW-I1 User's Guide

Figure 16 Connection Wizard: Wireless Security: Basic Security Screen 1

The following table describes the labels in this screen.

Table 8 Connection Wizard: Wireless Security: Basic Security Screen 1

LABEL
WEP Key
Back
Next
Exit

3.5.3 Wireless Security: Basic Security Screen 2

Use this screen to enable OTIST for your wireless network.
60
DESCRIPTION
Enter the key you want to use. You can enter the key using printable ASCII
characters or hexadecimal (0-9, A-F, a-f) characters. The ZyXEL Device and the
wireless stations must use the same WEP key.
If you want to use a 64-bit WEP key, enter 5 printable ASCII characters or 10
hexadecimal characters.
If you want to use a 128-bit WEP key, enter 13 printable ASCII characters or 26
hexadecimal characters. A 128-bit WEP key is more secure than a 64-bit WEP key.
Click this to return to the previous screen.
Click this to save your changes on this screen and to proceed to the next screen.
Click this to close the wizard without saving the changes on this screen.
Chapter 3 Connection Wizard