Figure 6-9 Wireless Lan: 802.1X/Wpa For 802.1X Protocol; Table 6-5 Wireless Lan: 802.1X/Wpa For 802.1X Protocol - ZyXEL Communications Prestige 662HW Series User Manual

Figure 6-9 Wireless LAN: 802.1x/WPA for 802.1x Protocol

The following table describes the labels in this screen.

Table 6-5 Wireless LAN: 802.1x/WPA for 802.1x Protocol

LABEL
Wireless Port To control wireless stations access to the wired network, select a control method from the
Control drop-down list box. Choose from No Authentication Required, Authentication Required
and No Access Allowed.
The following fields are only available when you select Authentication Required.
ReAuthentication Specify how often wireless stations have to reenter usernames and passwords in order to
Timer stay connected. This field is activated only when you select Authentication Required in
(in Seconds) the Wireless Port Control field.
Enter a time interval between 10 and 9999 seconds. The default time interval is 1800
seconds (30 minutes).
Idle Timeout The Prestige automatically disconnects a wireless station from the wired network after a
(in Seconds) period of inactivity. The wireless station needs to enter the username and password again
before access to the wired network is allowed.
This field is activated only when you select Authentication Required in the Wireless Port
Control field. The default time interval is 3600 seconds (or 1 hour).
Key Management Choose 802.1x from the drop-down list.
Protocol
Wireless LAN Setup
DESCRIPTION
If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server has
priority.
Prestige 662HW Series User's Guide
6-13