Services Setup Screen; Figure 36 Bwm Wizard: Services Setup - ZyXEL Communications P-870HW-I Series User Manual

Table 25 BWM Wizard: General Information (continued)
LABEL
WAN Managed
Bandwidth
Back
Next
Exit

4.4 Services Setup Screen

Use this screen to select the applications to which you want to allocate bandwidth. You can
use the applications you do not select, as well as ones that do not appear on this list, but they
have lower priority.

Figure 36 BWM Wizard: Services Setup

Chapter 4 Bandwidth Management Wizard
DESCRIPTION
Enter the amount of bandwidth for this interface that you want to allocate using
bandwidth management.
It is recommended to set this speed to match what the WAN port's connection can
handle. For example, set it to 40000 kbps if your broadband modem or router has a
maximum speed of 40000 kbps.
You can set this number higher than the interface's actual transmission speed. This
will stop lower priority traffic from being sent if higher priority traffic uses all of the
actual bandwidth.
You can also set this number lower than the interface's actual transmission speed.
However, this will cause the ZyXEL Device to not use some of the interface's
available bandwidth.
Click this to return to the previous screen.
Click this to save your changes on this screen and to proceed to the next screen.
Click this to close the wizard without saving the changes on this screen.
P-870HW-I1 User's Guide
81