Dynamic Wep; Figure 38 Wireless: 802.1X + Dynamic Wep; Table 28 Wireless: 802.1X + Dynamic Wep - ZyXEL Communications ZyWALL 5 User Manual

ZyWALL 5 User's Guide
Table 27 Wireless: WPA (continued)
LABEL
Apply
Reset
6.11.4 802.1x + Dynamic WEP
Select 802.1x + Dynamic WEP from the Security list.

Figure 38 Wireless: 802.1x + Dynamic WEP

The following wireless LAN security fields become available when you select 802.1x +
Dynamic WEP in the Security drop down list-box.

Table 28 Wireless: 802.1x + Dynamic WEP

LABEL
Security
ReAuthentication
Timer (Seconds)
Idle Timeout
(Seconds)
114
DESCRIPTION
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Select 802.1x + Dynamic WEP from the drop-down list.
Specify how often wireless stations have to reenter usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds.
If wireless station authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
The ZyWALL automatically disconnects a wireless station from the wired network
after a period of inactivity. The wireless station needs to enter the username and
password again before access to the wired network is allowed.
Chapter 6 Wireless LAN