Resetting The Zyxel Device - ZyXEL Communications P-870HW-I Series User Manual

2.4 Resetting the ZyXEL Device

Reset the ZyXEL Device in the following situations:
• You forgot your password.
• You cannot access the device using the web configurator or SMT. Check
Troubleshooting to make sure you cannot access the device anymore.
If you reset the ZyXEL Device, you lose all of the changes you have made. The ZyXEL
Device re-loads its default settings, and the password resets to "1234". You have to make all
of your changes again.
Note: You will lose all of your changes when you push the RESET button.
To reset the ZyXEL Device,
1 Make sure the PWR/SYS light is on and not blinking.
2 ress and hold the RESET button until the PWR/SYS light begins to blink. (The
P
WLAN/OTIST light might start blinking first. Wait until the PWR/SYS light starts
blinking.) The default settings have been restored, and the ZyXEL Device begins to
restart.
If the ZyXEL Device restarts automatically, wait for the ZyXEL Device to finish restarting,
and log in to the web configurator. The password is 1234. You have finished.
If the ZyXEL Device does not restart automatically,
power. Then, follow the directions above again.
Chapter 2 Introducing the Web Configurator
P-870HW-I1 User's Guide
sconnect and reconnect the Prestige's
di
53