Table of Contents
Advertisement
P-870HW-I1 User's Guide
Figure 193 Menu 11.1: Remote Node Profile
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= PPPoE
Service Name=
Outgoing:
My Login= hello
My Password= ********
Retype to Confirm= ********
Authen= CHAP/PAP
The following table describes the labels in this menu.
Table 141 Menu 11.1: Remote Node Profile
FIELD
Rem Node Name
Active
Encapsulation
Service Name
My Login
My Password
Retype to Confirm
Authen
Route
Edit IP
Telco Option
Allocated Budget(min) Enter the maximum amount of time (in minutes) each call can last. Enter 0 if
Period(hr)
Schedules
302
Menu 11.1 - Remote Node Profile
DESCRIPTION
Enter the name of the ISP.
Select whether or not you want to use this Internet connection.
Select the type of encapsulation your ISP uses.
Enter the service name provided by your ISP. Leave this field blank if your ISP
did not provide one.
Enter the user name provided by your ISP.
Enter the password provided by your ISP.
Enter the password again.
This field appears if you select PPPoE in the Encapsulation field. Select what
type of authentication your ISP uses. Select CHAP/PAP if you want the ZyXEL
Device to support both choices.
This field displays the type of routing the ZyXEL Device uses.
If you want to set up the WAN IP address and advanced features for the WAN
port, press [SPACE BAR] to select Yes and press [ENTER]. Menu 11.1.2
appears.
These fields appear if you select PPPoE in the Encapsulation field.
there is no limit.
Enter how often (in hours) the Allocated Budget is reset. For example, if you
can call for thirty minutes every hour, set the Allocated Budget to 30, and set
this field to 1.
Enter the schedule sets that apply to this connection.
Route= IP
Edit IP= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedules=
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Edit Traffic Redirect= No
Chapter 30 Filter Setup
Advertisement
Table of Contents
Troubleshooting
