Use this menu to set up the LAN IP address, DHCP server, additional subnets, and input and
output filter sets for the LAN port. You can also use this menu to configure the wireless
network.
24.1 LAN Port Filter Setup
Use this menu to specify input and output filter sets for the LAN port. See
287
for background information. To open this menu, enter 1 in menu 3.
Figure 159 Menu 3.1: LAN Port Filter Setup
The following table describes the labels in this menu.
Table 117 Menu 3.1: LAN Port Filter Setup
FIELD
Input Filter Sets
protocol filters
device filters
Output Filter Sets
protocol filters
device filters
Chapter 24 LAN Setup
C
Menu 3.1 - LAN Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
DESCRIPTION
Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
Enter up to four filter sets. If you enter more than one, separate each one with a
comma ( , ).
P-870HW-I1 User's Guide
H A P T E R
LAN Setup
2 4
Chapter 30 on page
259