Dynamic Wep; Figure 39 Wireless: 802.1X + Dynamic Wep; Table 29 Wireless: 802.1X + Dynamic Wep - ZyXEL Communications ZyWall 35 User Manual

Table 28 Wireless: WPA (continued)
LABEL
Apply
Reset
6.11.4 802.1x + Dynamic WEP
Select 802.1x + Dynamic WEP from the Security list.

Figure 39 Wireless: 802.1x + Dynamic WEP

The following wireless LAN security fields become available when you select 802.1x +
Dynamic WEP in the Security drop down list-box.

Table 29 Wireless: 802.1x + Dynamic WEP

LABEL
Security
ReAuthentication
Timer (Seconds)
Idle Timeout
(Seconds)
Chapter 6 Wireless LAN
DESCRIPTION
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Select 802.1x + Dynamic WEP from the drop-down list.
Specify how often wireless stations have to reenter usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds.
If wireless station authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
The ZyWALL automatically disconnects a wireless station from the wired network
after a period of inactivity. The wireless station needs to enter the username and
password again before access to the wired network is allowed.
ZyWALL 35 User's Guide
119