P-870HW-I1 User's Guide
Table 91 Management > Bandwidth MGMT > Configuration > Edit (continued)
LABEL
Source Port
Protocol
Apply
Reset
15.4 Bandwidth Monitor
Use this screen to view the ZyXEL Device's bandwidth usage and allotments. To open this
screen, click Management > Bandwidth MGMT > Monitor.
Figure 114 Management > Bandwidth MGMT > Monitor
204
DESCRIPTION
Enter the port number of the source.
Select the protocol (TCP or UDP) or select User defined and enter the protocol
(service type) number. A blank protocol ID means any protocol number.
Click this to save your changes back to the ZyXEL Device.
Click this to begin configuring this screen afresh.
Chapter 15 Bandwidth MGMT