Table 29 Status - ZyXEL Communications P-870HW-I Series User Manual

P-870HW-I1 User's Guide
The following table describes the labels shown in the Status screen.

Table 29 Status

LABEL
Refresh Interval
Refresh Now
Device Information
System Name
Firmware Version
WAN Information
IP Address
IP Subnet Mask
DHCP
LAN Information
IP Address
IP Subnet Mask
DHCP
WLAN Information
Name(SSID)
Channel
Security Mode
System Status
System Uptime
Current Date/Time This field displays your ZyXEL Device's present date and time. Click Maintenance
System Resource
CPU Usage
86
DESCRIPTION
Select a number of seconds or None from the drop-down list box to refresh all
screen statistics automatically at the end of every time interval or to not refresh the
screen statistics.
Click this button to refresh the status screen statistics.
This is used for identification purposes. Click Maintenance > System > General
to change it.
This is the ZyNOS Firmware version and the date created. ZyNOS is ZyXEL's
proprietary Network Operating System design. Click Maintenance > Tools >
Firmware to change it.
This is the WAN port IP address. Click Network > WAN > Internet Connection to
change it.
This is the WAN port IP subnet mask. Click Network > WAN > Internet
Connection to change it.
This is the WAN port DHCP role - Client or None. Click Network > WAN >
Internet Connection to change it.
This is the LAN port IP address. Click Network > LAN > IP to change it.
This is the LAN port IP subnet mask. Click Network > LAN > IP to change it.
This is the LAN port DHCP role - Server, Relay or None. Click Network > DHCP
Server > General to change it.
This is the descriptive name used to identify the ZyXEL Device in the wireless
LAN. Click Network > Wireless LAN > General to change it.
This is the channel number used by the ZyXEL Device now. Click Network >
Wireless LAN > General to change it.
This field displays what kind of authentication and encryption the ZyXEL Device is
currently using in the wireless network. Click Network > Wireless LAN > General
to change it.
This is the total time the ZyXEL Device has been on.
> System > Time Setting to change it.
This field displays what percentage of the ZyXEL Device's processing ability is
currently used. When this percentage is close to 100%, the ZyXEL Device is
running at full load, and the throughput is not going to improve anymore. If you
want some applications to have more throughput, you should use bandwidth
management to turn off other applications. Click Management > Bandwidth
MGMT > Configuration.
Chapter 5 Status Screen