Installing Upnp In Windows Example; Figure 125 Add/Remove Programs: Windows Setup: Communication - ZyXEL Communications P-870HW-I Series User Manual

Table 103 Configuring UPnP
LABEL
Allow UPnP to pass through
Firewall
Apply
Reset

17.4 Installing UPnP in Windows Example

This section shows how to install UPnP in Windows Me and Windows XP.
Installing UPnP in Windows Me
Follow the steps below to install the UPnP in Windows Me.
1 Click Start and Control Panel. Double-click Add/Remove Programs.
2 Click on the Windows Setup tab and select Communication in the Components
selection box. Click Details.

Figure 125 Add/Remove Programs: Windows Setup: Communication

3 In the Communications window, select the Universal Plug and Play check box in the
Components selection box.
Chapter 17 UPnP
DESCRIPTION
Select this to allow traffic from UPnP-enabled applications to bypass the
firewall. Clear this to have the firewall block all UPnP application
packets (for example, MSN packets).
Click this to save the setting to the ZyXEL Device.
Click this to return to the previously saved settings.
P-870HW-I1 User's Guide
219