Directory Servers Screen; Figure 107 Security > Certificates > Directory Servers; Table 83 Security > Certificates > Directory Servers - ZyXEL Communications P-870HW-I Series User Manual

P-870HW-I1 User's Guide
Table 82 Security > Certificates > Trusted Remote Hosts > Edit (continued)
LABEL
Apply
Cancel

13.13 Directory Servers Screen

Use this screen to look at the current list of directory servers, which the ZyXEL Device checks
if the certificate does not list a server or if the listed server is not available. To open this
screen, click Security > Certificates > Directory Servers.
Figure 107 Security > Certificates > Directory Servers
The following table describes the labels in this screen.
Table 83 Security > Certificates > Directory Servers
LABEL
PKI Storage Space
in Use
#
Name
Address
Port
Protocol
Modify
Add
190
DESCRIPTION
Click this to save your changes back to the ZyXEL Device.
Click this to return to the previous screen without saving any changes.
DESCRIPTION
This bar displays the percentage of the ZyXEL Device's PKI storage space that is
currently in use. The bar turns from green to red when the maximum is being
approached. When the bar is red, you should consider deleting expired or
unnecessary certificates before adding more certificates.
The index number of the directory server. The servers are listed in alphabetical
order.
This field displays the name used to identify this directory server.
This field displays the IP address or domain name of the directory server.
This field displays the port number that the directory server uses.
This field displays the protocol that the directory server uses.
Click an Edit icon to open the Edit Directory Server screen.
Click a Remove icon to remove the directory server entry.
Click this to open the Edit Directory Server screen to add a new directory server.
Chapter 13 Certificates