Client List Screen; Figure 73 Network > Dhcp Server > Client List; Table 57 Network > Dhcp Server > Client List - ZyXEL Communications P-870HW-I Series User Manual

P-870HW-I1 User's Guide
Table 56 DHCP Setup
LABEL
IP Address
Apply
Reset

9.4 Client List Screen

Use this screen to look at the current list of DHCP clients. It is empty if the DHCP server is
disabled. To open this screen, click Network > DHCP Server > Client List.
Figure 73 Network > DHCP Server > Client List
The following table describes the labels in this screen.
Table 57 Network > DHCP Server > Client List
LABEL
#
IP Address
Host Name
MAC Address
Reserve
Apply
Refresh
136
DESCRIPTION
Enter the static IP address you want to assign to the specified computer.
Click this to save your changes back to the ZyXEL Device.
Click this to begin configuring this screen afresh.
DESCRIPTION
This field is a sequential value, and it is not associated with any entry.
This field displays the IP address assigned to the computer.
This field displays the host name of the computer.
This field displays the MAC address of the computer to which the IP address is
assigned.
Select this, and click Apply to use the information in this entry to create an entry in
the Static DHCP table. See Network > DHCP Server > Static DHCP.
Click this to save your changes back to the ZyXEL Device.
Click this to update this screen.
Chapter 9 DHCP Server