Log Command Example - ZyXEL Communications P-870HW-I Series User Manual

P-870HW-I1 User's Guide
• Use the sys logs display [log category] command to show the logs in an individual
ZyXEL Device log category.
• Use the sys logs clear command to erase all of the ZyXEL Device's logs.

Log Command Example

This example shows how to set the ZyXEL Device to record the access logs and alerts and
then view the results.
ras> sys logs load
ras> sys logs category access 3
ras> sys logs save
ras> sys logs display access
#.time
message
0|06/08/2004 05:58:21 |172.21.4.154
BLOCK
Firewall default policy: IGMP (W to W/ZW)
1|06/08/2004 05:58:20 |172.21.3.56
BLOCK
Firewall default policy: IGMP (W to W/ZW)
2|06/08/2004 05:58:20 |172.21.0.2
BLOCK
Firewall default policy: IGMP (W to W/ZW)
3|06/08/2004 05:58:20 |172.21.3.191
BLOCK
Firewall default policy: IGMP (W to W/ZW)
4|06/08/2004 05:58:20 |172.21.0.254
BLOCK
Firewall default policy: IGMP (W to W/ZW)
5|06/08/2004 05:58:20 |172.21.4.187:137
BLOCK
Firewall default policy: UDP (W to W/ZW)
412
source destination
|224.0.1.24
|239.255.255.250
|239.255.255.254
|224.0.1.22
|224.0.0.1
|172.21.255.255:137
Appendix F Log Descriptions
notes
|ACCESS
|ACCESS
|ACCESS
|ACCESS
|ACCESS
|ACCESS