Table 102 Tr-069 Commands - ZyXEL Communications P-870HW-I Series User Manual

P-870HW-I1 User's Guide
The following table gives a description of TR-069 commands.

Table 102 TR-069 Commands

Command or
Root
Subdirectory
wan tr069
216
Command Description
All TR-069 related commands must be preceded by wan tr069.
Start configuring TR-069 on your ZyXEL Device.
load
Enable/disable TR-069 operation.
active [0:no/
1:yes]
Set the IP address or domain name of CNM Access.
acsUrl <URL>
Username used to authenticate the device when making a
username
connection to CNM Access. This username is set up on the server
[maxlength:15]
and must be provided by the CNM Access administrator.
Password used to authenticate the device when making a connection
password
to CNM Access. This password is set up on the server and must be
[maxlength:15]
provided by the CNM Access administrator.
Whether or not the device must periodically send information to CNM
periodicEnable
Access. It is recommended to set this value to 1 in order for the
[0:Disable/
ZyXEL Device to send information to CNM Access.
1:Enable]
The duration in seconds of the interval for which the device MUST
informInterval
attempt to connect with CNM Access to send information and check
[sec]
for configuration updates. Enter a value between 30 and
2147483647 seconds.
Save the TR-069 settings to your ZyXEL Device.
save
Chapter 16 Remote MGMT