Figure 8 Login: Replace Certificate Screen
5 Follow the directions in this screen. If you click Ignore, this screen appears the next time
you log in. Afterwards, the following screen appears.
Figure 9 Login: Select Mode Screen
6 Select Go to Wizard setup to use the wizards. See
on page
page
49.
Note: By default, the web configurator automatically times out in five minutes. Simply
log back into the ZyXEL Device if this happens to you. You can change this
setting; see
2.3 Navigating the Web Configurator
The main screen is shown below. Your screen may be different, depending on the size of your
browser window, resolution, and so on.
Chapter 2 Introducing the Web Configurator
77. Select Go to Advanced setup to open the main screen. See
Chapter 18 on page
Chapter 3 on page 55
229.
P-870HW-I1 User's Guide
and
Chapter 4
Section 2.3 on
49