Introducing The Web Configurator; Web Configurator Overview; Accessing The Web Configurator - ZyXEL Communications P-870HW-I Series User Manual

This chapter describes how to access and navigate the web configurator.

2.1 Web Configurator Overview

The web configurator is an HTML-based management interface that allows easy ZyXEL
Device setup and management via Internet browser. Use Internet Explorer 6.0 and later or
Netscape Navigator 7.0 and later versions. The recommended screen resolution is 1024 by 768
pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by
default in Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
See Chapter 39 on page 351
Explorer.

2.2 Accessing the Web Configurator

Note: Even though you can connect to the ZyXEL Device wirelessly, it is
recommended that you connect your computer to a LAN port for initial
configuration.
1 Follow the directions in the Quick Start Guide to set up your ZyXEL Device and to
connect your computer.
2 Launch your web browser, and go to http://192.168.1.1.. The following screen appears.
Chapter 2 Introducing the Web Configurator
C
Introducing the Web
if you need to make sure these functions are allowed in Internet
P-870HW-I1 User's Guide
H A P T E R
Configurator
2
47