Table of Contents
Advertisement
P-870HW-I1 User's Guide
1 Display menu 24.5 and enter "y" at the following screen.
Figure 207 System Maintenance: Backup Configuration
2 The following screen indicates that the Xmodem download has started.
Figure 208 System Maintenance: Starting Xmodem Download Screen
3 Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the
following screen.
Figure 209 Backup Configuration Example
4 After a successful backup you will see the following screen. Press any key to return to the
SMT menu.
Figure 210 Successful Backup Confirmation Screen
35.3 Restore Configuration
Menu 24.6 –- System Maintenance – Restore Configuration allows you to restore the
configuration via FTP or TFTP to your ZyXEL Device. The preferred method is FTP. Note
that this function erases the current configuration before restoring the previous backup
configuration; please do not attempt to restore unless you have a backup configuration stored
on disk. To restore configuration using FTP or TFTP is the same as uploading the
configuration file, please refer to the following sections on FTP and TFTP file transfer for
more details. The ZyXEL Device restarts automatically after the file transfer is complete.
324
Ready to backup Configuration via Xmodem.
Do you want to continue (y/n):
You can enter ctrl-x to terminate operation any time.
Starting XMODEM download...
** Backup Configuration completed. OK.
### Hit any key to continue.###
Type a location
for storing the
configuration file
or click Browse
to look for one.
Choose the
Xmodem protocol.
Then click Receive.
Chapter 35 System Maintenance 24.5 - 24.7
Advertisement
Table of Contents
Troubleshooting
