Status: Bw Mgmt Monitor - ZyXEL Communications P-870HW-I Series User Manual

Table 29 Status
LABEL
Memory Usage
Interface Status
Interface
Status
Rate
Summary
DHCP Table
WLAN Station
Status
BW MGMT
Monitor
Packet Statistics

5.1.1 Status: BW MGMT Monitor

Use this screen to view the bandwidth usage based on the rules you configure for the LAN,
WAN and WLAN. To access this screen, click Status, and then click (Details...) next to BW
MGMT Monitor.
Chapter 5 Status Screen
DESCRIPTION
This field displays what percentage of the ZyXEL Device's memory is currently
used. Usually, this percentage should not increase much. If memory usage does
get close to 100%, the ZyXEL Device is probably becoming unstable, and you
should restart the device. Click Maintenance > Tools > Restart, or turn off the
device (unplug the power) for a few seconds.
This field displays the ZyXEL Device ports.
For the WAN port, this field depends on the encapsulation.
For Ethernet encapsulation:
Down - line is down
Up - line is up or connected
For PPP over Ethernet (PPPoE) encapsulation:
Down - line is down
Up - line is up or connected
Idle - line (ppp) idle
Dial - starting to trigger a call
Drop - dropping a call
For the LAN port, this field displays one of the following values:
Down - there are no LAN connections
Up - line is at least one LAN connection
For the WLAN port, this field displays one of the following values:
Down - the wireless interface is disabled
Up - the wireless interface is enabled
For the WAN port, this field displays the downstream and upstream transmission
rates.
For the LAN port, this field displays the port speed and duplex setting.
For the WLAN port, this field displays the transmission rate.
If any port is down or disabled, this field displays N/A.
Use this screen to view current DHCP client information.
This screen displays the MAC address(es) of the wireless stations that are
currently associating with the ZyXEL Device.
Use this screen to view the ZyXEL Device's bandwidth usage and allotments.
Use this screen to view port status and packet specific statistics.
P-870HW-I1 User's Guide
87