Configure Dynamic Dns; Figure 156 Menu 1.1: Configure Dynamic Dns; Table 114 Menu 1.1: Configure Dynamic Dns - ZyXEL Communications P-870HW-I Series User Manual

P-870HW-I1 User's Guide
Table 113 Menu 1: General Setup (continued)
FIELD
First System DNS
Server
Second System DNS
Server
Third System DNS
Server
IP Address
Edit Dynamic DNS

22.2 Configure Dynamic DNS

Use this menu to configure your dynamic DNS account settings. See
for background information. To open this menu, select Yes in Edit Dynamic DNS in menu 1.

Figure 156 Menu 1.1: Configure Dynamic DNS

Service Provider= WWW.DynDNS.ORG
Active= No
Username=
Password= ********
Edit Host= No
The following table describes the labels in this menu.

Table 114 Menu 1.1: Configure Dynamic DNS

FIELD
Service Provider
Active
Username
Password
Edit Host
254
DESCRIPTION
Press [SPACE BAR] to select From ISP, User Defined or None and press
[ENTER]. These fields are not available on all models.
Select From ISP if your ISP dynamically assigns DNS server information. (In
this case, the ISP assigns the WAN IP address too. See Menu 4.) The field to
the right is read-only, and it displays the IP address provided by your ISP.
Select User-Defined if you have the IP address of a DNS server. You might get
it from your ISP or from your network. Enter the IP address in the field below.
Select None if you do not want to use this DNS server. If you select None for
all of the DNS servers, you must use IP addresses to configure the ZyXEL
Device and to access the Internet.
Enter the IP addresses of the DNS servers. This field is available when you
select User-Defined in the field above.
If you want to set up dynamic DNS, press [SPACE BAR] to select Yes and
press [ENTER]. Menu 1.1 appears.
Menu 1.1 - Configure Dynamic DNS
DESCRIPTION
Select the name of your Dynamic DNS service provider.
Select Yes to use dynamic DNS.
Type the user name for your Dynamic DNS account.
Type the password for your Dynamic DNS account.
If you want to set up a domain name to use with your dynamic DNS account,
press [SPACE BAR] to select Yes and press [ENTER]. Menu 1.1.1 appears.
Chapter 18 on page 229
Chapter 22 General Setup