Wireless Security: Auto; Figure 17 Connection Wizard: Wireless Security: Basic Security Screen 2; Table 9 Connection Wizard: Wireless Security: Basic Security Screen 2 - ZyXEL Communications P-870HW-I Series User Manual

Figure 17 Connection Wizard: Wireless Security: Basic Security Screen 2

The following table describes the labels in this screen.

Table 9 Connection Wizard: Wireless Security: Basic Security Screen 2

LABEL
Do you want to
enable OTIST?
Setup Key
Back
Next
Exit

3.5.4 Wireless Security: Auto

Use this screen to enable OTIST for your wireless network.
Chapter 3 Connection Wizard
DESCRIPTION
Select Yes if you want to set up OTIST security. If you set up OTIST, your wireless
network uses WPA-PSK security, not the security you selected and set up in the
previous screen(s). See Section 6.5 on page 108
up OTIST.
Type a key (password) 8 ASCII characters long.
Note: You must set up the same OTIST key on the wireless clients
too.
Click this to return to the previous screen.
Click this to save your changes on this screen and to proceed to the next screen.
Click this to close the wizard without saving the changes on this screen.
P-870HW-I1 User's Guide
for more information about setting
61