Table of Contents
Advertisement
Figure 183 Menu 21.1.1: Filter Rules Summary
# A Type
- - ---- --------------------------------------------------------------- -
- -
1 Y IP
2 Y IP
3 Y IP
4 Y IP
5 Y IP
6 Y IP
This screen shows the summary of the existing rules in the filter set. The following tables
contain a brief description of the abbreviations used in the previous menus.
Table 137 Abbreviations Used in the Filter Rules Summary Menu
FIELD
#
A
Type
Filter Rules These parameters are displayed here.
M
m
n
The protocol dependent filter rules abbreviation are listed as follows:
Table 138 Rule Abbreviations Used
ABBREVIATION
IP
Pr
Chapter 30 Filter Setup
Menu 21.1.1 - Filter Rules Summary
Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=137
Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=138
Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=139
Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=137
Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=138
Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=139
Enter Filter Rule Number (1-6) to Configure:
DESCRIPTION
The filter rule number: 1 to 6.
Active: "Y" means the rule is active. "N" means the rule is inactive.
The type of filter rule: "GEN" for Generic, "IP" for TCP/IP.
More.
"Y" means there are more rules to check which form a rule chain with the present rule. An
action cannot be taken until the rule chain is complete.
"N" means there are no more rules to check. You can specify an action to be taken i.e.,
forward the packet, drop the packet or check the next rule. For the latter, the next rule is
independent of the rule just checked.
Action Matched.
"F" means to forward the packet immediately and skip checking the remaining rules.
"D" means to drop the packet.
"N" means to check the next rule.
Action Not Matched
"F" means to forward the packet immediately and skip checking the remaining rules.
"D" means to drop the packet.
"N" means to check the next rule.
DESCRIPTION
Protocol
Filter Rules
P-870HW-I1 User's Guide
M m n
N D N
N D N
N D N
N D N
N D N
N D F
291
Advertisement
Table of Contents
Troubleshooting
