Figure 204 Menu 24.4: System Maintenance - Diagnostic; Table 150 Menu 24.4: System Maintenance - Diagnostics - ZyXEL Communications P-870HW-I Series User Manual

P-870HW-I1 User's Guide

Figure 204 Menu 24.4: System Maintenance - Diagnostic

The following table describes the labels in this menu.

Table 150 Menu 24.4: System Maintenance - Diagnostics

FIELD
Ping Host
WAN DHCP Release
WAN DHCP Renewal Select this if you want to get a new IP address, subnet mask, and other network
PPPoE Setup Test
Reboot System
Enter Menu Selection
Number
Host IP Address
318
Menu 24.4 - System Maintenance - Diagnostic
TCP/IP
1. Ping Host
2. WAN DHCP Release
3. WAN DHCP Renewal
4. PPPoE Setup Test
System
11. Reboot System
Enter Menu Selection Number:
Host IP Address= N/A
DESCRIPTION
Select this if you want to ping a specific computer. Enter 1 in the Enter Menu
Selection Number field, and then enter the IP address in the Host IP Address
field.
Select this if you want to release the IP address, subnet mask, and other
network information provided by the DHCP server.
information from the DHCP server.
Select this if you want to test the current PPPoE settings. You cannot run this
test if you selected Ethernet in the Encapsulation field.
Use this screen to reboot the ZyXEL Device without turning the power off. This
does not affect the ZyXEL Device's configuration.
Enter the test you want to perform.
If you select Ping Host, enter the IP address of the computer you want the
ZyXEL Device to ping.
Chapter 34 System Maintenance 24.1 - 24.4