Figure 140 Maintenance > System > Dynamic Dns; Table 105 Maintenance > System > Dynamic Dns - ZyXEL Communications P-870HW-I Series User Manual

P-870HW-I1 User's Guide
Figure 140 Maintenance > System > Dynamic DNS
The following table describes the fields in this screen.
Table 105 Maintenance > System > Dynamic DNS
LABEL
Dynamic DNS
Setup
Enable Dynamic
DNS
Service Provider
Dynamic DNS
Type
Host Name
User Name
Password
Enable Wildcard
Option
Enable off line
option
IP Address
Update Policy
Use WAN IP
Address
232
DESCRIPTION
Select this to use dynamic DNS.
Select the name of your Dynamic DNS service provider.
Select the type of service for which you are registered from your Dynamic DNS
service provider.
Type the domain name assigned to your ZyXEL Device by your Dynamic DNS
provider. You can specify up to two host names in the field; separate them with a
comma ( , ).
Type the user name for your Dynamic DNS account.
Type the password for your Dynamic DNS account.
Select this to enable DynDNS Wildcard.
This option is available when Custom DNS is selected in the DDNS Type field.
Check with your Dynamic DNS service provider to have traffic redirected to a URL
(that you can specify) while you are off line.
Select this to assign the WAN IP address for the host name(s).
Chapter 18 System