Figure 224 Menu 24.11: Remote Management Control; Table 157 Menu 24.11: Remote Management Control - ZyXEL Communications P-870HW-I Series User Manual

P-870HW-I1 User's Guide

Figure 224 Menu 24.11: Remote Management Control

TELNET Server:
FTP Server:
SSH Server:
HTTPS Server:
HTTP Server:
SNMP Service:
DNS Service:
The following table describes the labels in this menu.

Table 157 Menu 24.11: Remote Management Control

FIELD
Port
Access
Secure Client IP
SSH Server
Certificate
HTTPS Server
Certificate
Authenticate Client
Certificates
338
Menu 24.11 - Remote Management Control
Port = 23
Secure Client IP = 0.0.0.0
Port = 21
Secure Client IP = 0.0.0.0
Certificate = newDefault
Port = 22
Secure Client IP = 0.0.0.0
Certificate = newDefault
Authenticate Client Certificates = No
Port = 443
Secure Client IP = 0.0.0.0
Port = 80
Secure Client IP = 0.0.0.0
Port = 161
Secure Client IP = 0.0.0.0
Port = 53
Secure Client IP = 0.0.0.0
DESCRIPTION
These fields are similar for all servers and services.
Enter the port number this service can use to access the ZyXEL Device. The
computer must use the same port number.
Select the interface(s) through which a computer may access the ZyXEL
Device using this service.
Enter an IP address to only allow the computer with this IP address to access
the ZyXEL Device using this service. Enter 0.0.0.0 to allow any computer to
access the ZyXEL Device using this service.
These fields are used by specific servers and services.
Select the certificate the ZyXEL Device provides to clients using this service.
Select the certificate the ZyXEL Device provides to clients using this service.
This field is disabled if you have not set up any trusted certification authorities.
Select this if you want the trusted certification authorities to check the clients'
certificates before the ZyXEL Device allows access using this service.
Access = ALL
Access = ALL
Access = ALL
Access = ALL
Access = ALL
Access = ALL
Access = ALL
Chapter 36 System Maintenance 24.8 - 24.11