Snmp Screen; Figure 118 Management > Remote Mgmt > Ftp; Table 97 Management > Remote Mgmt > Ftp - ZyXEL Communications P-870HW-I Series User Manual

Figure 118 Management > Remote MGMT > FTP
Each field is described in the following table.
Table 97 Management > Remote MGMT > FTP
LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Reset

16.5 SNMP Screen

Use this screen to control SNMP with your ZyXEL Device. To open this screen, click
Management > Remote MGMT > SNMP.
Chapter 16 Remote MGMT
DESCRIPTION
Enter the port number this service can use to access the ZyXEL Device. The
computer must use the same port number.
Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Select Selected to only allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
P-870HW-I1 User's Guide
211