P-870HW-I1 User's Guide
Figure 174 Menu 15.1.1: Address Mapping Rules
Set Name= ACL Default Set
Idx
Local Start IP
---
---------------
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
The following table describes the labels in this menu.
Table 132 Menu 15.1.1: Address Mapping Rules
FIELD
Set Name
Idx
Local Start IP
Local End IP
Global Start IP
Global End IP
280
Menu 15.1.1 - Address Mapping Rules
Local End IP
---------------
Action= None
DESCRIPTION
Enter a descriptive name for the NAT mapping rules.
This is the rule index number.
This is the range of IP addresses on the LAN port.
Local Start IP is N/A for Server port mapping.
Local End IP is N/A for One-to-one and Server mapping types.
This is the corresponding range of IP addresses on the WAN port.
Global Start IP should be 0.0.0.0 if both of the following conditions are
satisfied.
•
Your ISP assigns the IP address of your WAN port.
•
The rule is a Many-to-One or Server rule.
Global End IP is N/A for One-to-one, Many-to-One and Server mapping
types.
Global Start IP
Global End IP
---------------
---------------
Select Rule= N/A
Chapter 29 NAT Setup
Type
--