Table of Contents
Advertisement
Use this menu to set up your Internet connection, input and output filter sets for the WAN port,
advanced features for the WAN port, or a backup gateway.
26.1 Remote Node Profile
Use this menu to set up your Internet connection. See
on page 347
Figure 165 Menu 11.1: Remote Node Profile
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= PPPoE
Service Name=
Outgoing:
My Login= hello
My Password= ********
Retype to Confirm= ********
Authen= CHAP/PAP
The following table describes the labels in this menu.
Table 123 Menu 11.1: Remote Node Profile
FIELD
Rem Node Name
Active
Encapsulation
Service Name
Chapter 26 Remote Node Setup
Remote Node Setup
for background information. To open this menu, enter 11 in the main menu.
Menu 11.1 - Remote Node Profile
DESCRIPTION
Enter the name of the ISP.
Select whether or not you want to use this Internet connection.
Select the type of encapsulation your ISP uses. If you change this setting, you
have to open menu 11.1.2 (Edit IP), update the settings, and save them before
you can save the settings in this menu.
Enter the service name provided by your ISP. Leave this field blank if your ISP
did not provide one.
C
H A P T E R
Chapter 7 on page 119
Route= IP
Edit IP= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedules=
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Edit Traffic Redirect= No
P-870HW-I1 User's Guide
2 6
and
Chapter 38
269
Advertisement
Table of Contents
Troubleshooting
