USART Peripheral Interface, SPI Mode
The
universal
synchronous/asynchronous
peripheral interface supports two serial modes with one hardware module.
This chapter discusses the operation of the synchronous peripheral interface
or SPI mode. USART0 is implemented on the MSP430x12xx, MSP430x13xx,
and MSP430x15x devices. In addition to USART0, the MSP430x14x and
MSP430x16x devices implement a second identical USART module,
USART1.
Topic
14.1 USART Introduction: SPI Mode
14.2 USART Operation: SPI Mode
14.3 USART Registers: SPI Mode
receive/transmit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USART Peripheral Interface, SPI Mode
Chapter 14
(USART)
Page
14-2
14-4
14-13
14-1