Preset; Persistent State Reset; Preset Type - HP ESA-E Series Programmer's Manual

Language Reference
SYSTem Subsystem
persistent, which means that it retains the setting
previously selected, even through a power cycle.
Front Panel
Access:
System, Power On/Preset, Power On Last Preset

Preset

:SYSTem:PRESet
Returns the instrument to a set of defined conditions. The particular set
is selected by :SYSTem:PRESet:TYPE. This command does not change
any persistent parameters. The term persistent means that the
command retains the setting previously selected, even through a power
cycle.
Front Panel
Access:
Preset

Persistent State Reset

:SYSTem:PRESet:PERSistent
Sets the persistent state values to their factory defaults. The term
persistent means that the command retains the setting previously
selected, even through a power cycle. Examples of persistent functions
are: HP-IB address, power-on type, and preset type.
Front Panel
Access:
System, Restore Sys Defaults

Preset Type

:SYSTem:PRESet:TYPE FACTory|USER
Selects the preset state to be either factory-defined or user-defined
preset conditions.
Factory Preset
and *RST: The factory default is FACTory. This parameter is
persistent, which means that it retains the setting
previously selected, even through a power cycle.
Remarks: :SYSTem:PRESet:USER:SAVE defines the user preset.
Front Panel
Access:
System, Power On/Preset, Preset Factory User
5-122 Chapter 5