HP ESA-E Series Programmer's Manual page 304

HP 8590-Series
Analyzers
Command(s)
CNTLD
CNTLI
COMB
COMPRESS
CONCAT
CONTS
:INITiate:CONTinuous ON|1
CORREK
:CALibration:FREQuency[:STATe]?
Corresponding SCPI Command(s) Description/Comments
Sets the interface control line D of the
auxiliary interface high or low.
HP ESA spectrum analyzers do not have an
auxiliary interface.
Returns a "1" when the interface control line I
of the auxiliary interface is high, and "0" if the
line is low.
HP ESA spectrum analyzers do not have an
auxiliary interface.
Turns the comb generator on or off.
This hardware is not present in HP ESA
spectrum analyzers.
Reduces the number of trace elements while
retaining the relative frequency and amplitude
characteristics of the trace data.
Combines two traces.
Sets the spectrum analyzer to the continuous
sweep mode.
Query the instrument for the state of
corrections.