HP ESA-E Series Programmer's Manual page 363

HP 8590-Series
Analyzers
Command(s)
VBR
VBR <value> [:SENSe]:BANDwidth|BWIDth:VIDeo:RATio <number>
VBR UP|DN
VBR? [:SENSe]:BANDwidth|BWIDth:VIDeo:RATio?
VIEW
TRACe[1]|2|3:MODE VIEW
WAIT
WINNEXT
WINOFF
WINON
WINZOOM
Corresponding SCPI Command(s) Description/Comments
Specifies coupling ratio of video bandwidth
to resolution bandwidth.
Specifies the ratio of the video bandwidth
to the resolution bandwidth. This
parameter is multiplied by the resolution
bandwidth to determine the automatic
setting of the video bandwidth.
The HP 8590-Series analyzer outputs data
in the format: .3000000. The HP ESA
analyzer outputs data in the format:
+3.00000000E-001.
Displays trace A, trace B, or trace C, and
stops taking new data into the viewed
trace.
Suspends all spectrum analyzer operation
for the specified time duration.
Makes the window that is currently not the
active window, active.
Turns off the windows display.
Activates the windows display mode.
Expands the size of the active window so
that it fills the entire spectrum analyzer
display.