HP ESA-E Series Programmer's Manual page 342

HP 8590-Series
Analyzers
Command(s)
PRNPRT
PRNTADRS
PSTATE
PU
PURGE
PWRBW
PWRUPTIME
PWRUPTIME? :SYSTem:PON:TIME?
Corresponding SCPI Command(s) Description/Comments
Directs the printer output to HP-IB, serial
or parallel ports.
Allows you to set the HP-IB address of the
printer.
Protects all of the spectrum analyzer user
state and trace registers from being
changed.
Instructs the spectrum analyzer not to plot
vectors on the spectrum analyzer screen
until a PD command is received.
Deletes the specified file from the current
mass storage device. Replaced by DELETE.
Computes the bandwidth around the trace
center, which includes signals whose total
power is a specified percentage of the total
trace signal power.
Returns the number of milliseconds that
have elapsed since the spectrum analyzer
was turned on.
The HP 8590-Series analyzer outputs data
in the format: 1.91557506E8. The HP ESA
analyzer data output format is under
development, and will be different than the
HP 8590-Series analyzer output format.