HP ESA-E Series Programmer's Manual page 295

HP 8590-Series
Analyzers
Command(s)
ABORT
ABS
ACP
ACPBW
ACPBW?
ACPCONTM
ACPE
ACPGR
ACPGRAPH
Corresponding SCPI Command(s) Description/Comments
Stops the execution of all user-defined
functions and readies the instrument for the
next command received.
Places the absolute value of the source values
in the destination.
Performs the adjacent channel power
measurement.
Allows you to specify the channel bandwidth
used for the adjacent channel power (ACP),
extended adjacent channel power (ACPE), and
channel power (CHP) measurements.
Changes the spectrum analyzer sweep mode to
continuous sweep, and then performs the
previous power measurement (occupied
bandwidth, adjacent channel, or channel
power) at the end of every sweep.
Performs the adjacent channel power extended
measurement.
Determines if the adjacent channel power
(ACP) graph function is enabled or disabled.
Computes and displays an adjacent channel
power (ACP) graph.