HP ESA-E Series Programmer's Manual page 329

HP 8590-Series
Analyzers
Command(s)
MKN
:CALCulate:MARKer[1]|2|3|4:MODE POSition
:CALCulate:MARKer[1]|2|3|4:X <param>
:CALCulate:MARKer[1]|2|3|4:MODE?
MKN?
MKNOISE
:CALCulate:MARKer[1]|2|3|4:FUNCtion NOISe|OFF
:CALCulate:MARKer[1]|2|3|4:FUNCtion?
MKNOISE?
MKOFF
:CALCulate:MARKer[1]|2|3|4:STATe OFF|ON|0|1
MKOFF ALL :CALCulate:MARKer:AOFF
Corresponding SCPI Command(s) Description/Comments
Activates and moves the marker to the
specified frequency.
Positions the designated marker on the
assigned trace at the specified x value. The
value is in the x axis units (which is often
frequency or time).
Positions the designated marker on the
assigned trace at the specified x position.
The HP 8590-Series analyzer outputs data in
the format: 750E6. The HP ESA analyzer
outputs data in the format:
+7.50000000E+008.
Displays the average noise level at the marker.
Selects the marker function for the specified
marker. NOISe is a noise measurement.
The HP 8590-Series analyzer outputs ON or
OFF. The HP ESA analyzer outputs 1 or 0.
Turns off either the active marker or all the
markers.
Turns the selected marker on or off.
Turns off all the markers on all the traces.