HP ESA-E Series Programmer's Manual page 312

HP 8590-Series
Analyzers
Command(s)
FMGAIN
FMGAIN <value> [:SENSe]:DEMod:FMDeviation <freq>
FMGAIN UP|DN
FMGAIN? [:SENSe]:DEMod:FMDeviation?
FOFFSET
:DISPlay:WINDow:TRACe:X[:SCALe]:OFFSet <freq>
FOFFSET? :DISPlay:WINDow:TRACe:X[:SCALe]:OFFSet?
FORMAT
FS
[:SENSe]:FREQuency:SPAN:FULL
FUNCDEF
GATE
GATE ON|OFF [:SENSe]:SWEep:TIME:GATE[:STATe] OFF|ON|0|1
Corresponding SCPI Command(s) Description/Comments
Sets the total FM deviation for full screen
demodulation.
The HP 8590-Series analyzer outputs data in
the format: 10. The HP ESA analyzer outputs
data in the format: +1.00000000E+001.
Specifies the frequency offset for all absolute
frequency readouts such as center frequency.
The HP 8590-Series analyzer outputs data in
the format: 10. The HP ESA analyze outputs
data in the format: +1.00000000E+001.
Formats the memory card.
Sets the frequency span of the spectrum
analyzer to full span.
Set the frequency span to full span.
Defines a routine consisting of spectrum
analyzer commands, assigns the routine a
label, and stores the routine and its label in the
user memory.
Turns time gating on or off.